Pedals

- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel

Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps

Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°

Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)

Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris. Slim Convex Profile Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support. Extra Grip Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized. Formed with Purpose The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer. Reliable Performance Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Precision Machining Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

An affordable pedal option for city cruiser bikes. Features a rubberized cage.

Wellgo B-Series BMX/Mountain Platform Pedals. Molded pins

Wellgo Clipless Cleats for SPD Style pedals.

Aluminum body with plastic cage overmolded.

Wellgo LU-895 DU Caged Mountain Pedals feature a 1-Piece molded, cage-style body with DU Polymer bearing/bushings. Accepts toe clips/straps

Wellgo B-Series BMX/Mountain Platform Pedals.

Wellgo WPD-823 Clipless Mountain Pedals. - Includes 98A cleats, Shimano SM-51 compatible - Dual-spring release/entry tension adjustment - Four degrees of Rotation - 9/16"

M111 Pedals Pedal Body Material: Aluminum Color: Black Pedal Type: Toe Clip Compatible Pedal Spindle: 9/16" Spindle Material: Chromoly Defined Color: Black Weight: 304

Pedal Body Material: Aluminum Color: Black Pedal Type: Platform Pedal Spindle: 9/16" Spindle Material: Chromoly Defined Color: Black Weight: 390

Wellgo LU-A52 BMX Platform Pedals provide stability and traction where it's needed. - Removable traction pins - Sealed bearings

Wellgo WPD-95B Clipless Mountain Pedals. - Includes 98A cleats, Shimano SM-SH51 compatible - Four degrees of Rotation

The SPEEDPLAY Walkable Cleat Cover Kit replaces your worn bicycle cleats to provide protection, comfort and traction. The kit is compatible with your Wahoo SPEEDPLAY Standard or Easy Tension Bike Cleats, as well as legacy SPEEDPLAY ZERO Walkable Cleats. The kit does include Cleat Surrounds.

Step, snap, and ride with confidence using the SPEEDPLAY easy tension walkable road cleat. While retaining all the advantages of the SPEEDPLAY Bike Pedal System, the easy action spring mechanism makes it a breeze to clip in and out. Enhanced walkability and adjustability make this bike cleat comfortable and functional for every level of cyclist. What's Included? - Cleat Assembly - Screw Packet - Quick Start Guide - Important Product Information Guide - Additional Tools Required for Assembly: #2 Philips Head Screwdriver

Make every effort count with the SPEEDPLAY standard tension road cleat. This integrated system delivers the power and engagement required to take on everything from steep climbs to all out racing. The only system to feature continuous 3-axis adjustability for all out performance and comfort on the bike. What's Included? - Cleat Assembly (Including Cleat Surrounds) - Screw Packet - Quick Start Guide - Important Product Information Guide - Additional Tools Required for Assembly: #2 Philips Head Screwdriver

The exceptional comfort and versatility of the Speedplay Comp road pedal derive from its confidence-inspiring and stable platform, offering both value and performance mile after mile for cyclists of all levels. Precise engagement, effortless release, and dual-sided entry with the Easy Tension Cleat deliver ease of use and confidence to the rider. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Versatile performance defines the advanced Speedplay system. Utilizing this innovative platform, Comp's confident engagement and stable platform provide benefits to riders at every level. - Weight: 224g (per pedal pair) - Spindle Material: Chromoly - Spindle Length: 53mm - Float: 5 to 15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs. - Weight: 224g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 39º - Bearing: Sealed

The Speedplay Nano is a featherweight, dual-sided road pedal that lives up to the demands of sprint finishes, categorized climbs, and tough training sessions. The mix of premium titanium and carbon fiber materials creates a lightweight but strong pedal that will hold up and deliver speed on the breakaway. The integrated cleat system with 3-axis adjustability allows you to precisely dial in your fit for optimized biometrics and increased power transfer. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimze fit and enhance performace through better biomechanics. Designed with the same level of focus and dedication it takes to earn a spot on the podium, Nano is a purpose-built, ultralight pedal that utilizes the proven Speedplay platform to offer every advantage come race-day. - Weight: 168g (per pedal pair) - Spindle Material: Titanium - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float). - Fits VP and Look Keo pedals (pedals sold separately)

VP's Vex Pedals are incredible workhorses with sturdy, large platforms and a dual-concave design with pins for an awesome grip. They're also light making them ideal for mountain biking, freeriding, BMX and even city riding. They're built to last, too, with cast-aluminum bodies, tough forged, heat-treated and CNC-machined chromoly axles and quality sealed bearings. - 385 grams - 9/16 axle

Lots of foot-huggin' lovin and a natural connection to your bike...that's what you get from VP’s all new, dual-concave platform design. VP-Aim was developed with input from both top free riders and local soul riders to deliver the right feeling of control and security at the right price. It’s still thin, it’s still stylish, and it can take all the beating that you can give it and keep rolling on. - 105 x105 x18mm platform - 9/16"

VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability. - 345 grams - 9/16" axles

VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability. - 406 grams - 9/16" axles

Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip. Confident and durable The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with dual bushings ensure lasting performance. PRODUCT DETAILS - Durable nylon body with a proven shape for comfort and confidence - Sturdy axle boosts durability and spins smoothly on dual bushings - Nylon traction pins provide forgiving, confident traction - Simple to install with either 6mm hex or standard 15mm pedal wrench

Platform pedals with a durable nylon design and replaceable pins for consistent grip. - Durable nylon body with a proven shape for comfort and confidence - Virtual concave design with pin placement secures your shoe for pedaling and descending - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with 8mm hex wrench

An extremely low-profile composite pedal that can handle just about any type of riding. - Ultra-durable composite body - Low-profile body in a slim-lined platform dimension - 2DU Bushing System with low-friction coating - Boron axles - 12 molded traction pins - Pedal body dimensions: 95 x 72 x 25mm (LxWxH) - 9/16"

Alloy pedals with a smaller platform that is ideal for smaller sized shoes and offers ample ground and cornering clearance. - 6061-T6 die-cast alloy body construction - 2DU Bushing System with low-friction coating - Boron axles - 14 removable traction pins per pedal - Pedal body dimensions: 105 x 93 x 25mm (LxWxH) - 9/16"

- The ATAC EASY 10° cleat works with all TIME mountain pedals. - Included with mountain pedal models numbered "2" and "4." - Release angle of 10 degrees and is compatible with all two-hole cycling shoes. - Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.

Replacement cleats for RXS pedals, featuring "Cafe" profiling, which means that when you walk into your local coffee shop for a mid-ride refreshment, you don't risk slipping and falling on the tile floor.

- The ATAC 13/17° cleat works with all TIME mountain pedals. - Included with all mountain pedal models numbered "6" and higher - Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe - Compatible with all two-hole cycling shoes.

- Works with all XPRO and XPRESSO pedals. - Not included with new XPRO and XPRESSO pedals. - This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

- Developed for the TIME XPRO & XPRESSO road bike pedal range. - They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. - You can also adjust the Q-factor (by switching the cleats) - The Bi-material brings more durability when walking with the cleats. - These cleats are the stock cleats included with all XPRO & XPRESSO pedals.

- Works with all RXS and Impact pedals. - Five degrees of heel float and 2.5mm of lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

Link is the easy way to up your pedal performance to clipless. The Link features a flat platform, which is perfect for almost any casual ride and gives you the freedom to ride and walk in the comfort of your favorite shoes. Or you can step into the TIME’s ATAC clipless system, which lets you clip-in with your favorite cycling shoe, giving you extra pedaling efficiency when you find yourself on longer or faster trips. - Ideal for the casual or urban cyclist who appreciates performance - Great option as a first clipless pedal - Aluminum body with steel spindle for durability - Easy in or out of cleat - Ride like a traditional flat pedal or step in to ATAC system - ATAC Standard Cleats included

If you’re after a great entry-level trail pedal, look no further than the MX 4. This pedal is lightweight yet rugged enough for any trail condition. TIME’s proprietary ATAC system makes clipping in super easy, secure, and comfortable. The MX 4 also is self-cleaning, with the ATAC system clearing mud or debris away every time you step in. And by swapping the cleats, you have two release angle options (13 or 17 degrees) along with a self-cleaning design that means you’ll always be able to clip in – even in the muddiest of conditions. - Light and durable pedal for off-road riding - Alloy body with steel spindle for durability - Easy clip-in and pedal engagement with self-cleaning ATAC cleat design that clears mud with every step-in - Freedom of movement lateral and angular - ATAC Standard Cleats included

The Xpresso 4 is built for dependable everyday use out on the road, ergonomic, and efficient pedal. The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter. - Great value for proven performance - Aluminum body with steel spindle for durability - Fast and easy cleat engagement - Low stack height for good clearance - ICLIC Cleats included

- All of the technologies from the rest of XPRESSO line at an affordable price. - The large platform, low stack height, and adjustable carbon blade tension make this a great pedal for all cyclists looking for pedaling comfort and efficiency without a high cost. - If you're new to clipless pedals or have ever struggled to clip into your pedals, you'll love the ICLIC system, which features a pre-opened design that makes clipping in extremely easy. Specs: - Pedal Material: Composite - Pedal Weight: 115g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

The ATAC XC 6 is an ideal option if you’re looking for a great deal in a performance pedal for cross country. The pedal features top ergonomics with a steel axle for durability, a composite body, and tension adjustment to customize the feel of the pedal underfoot. The exclusive ATAC clamping system offers easy engagement, and the open design automatically clears debris each time you step in. - Durable design for cross country, gravel, or cyclocross - Composite body with steel spindle for durability - Easy clip-in and pedal engagement with self-cleaning ATAC cleat design that clears mud with every step-in - Tension adjustment - ATAC Standard Cleats included

- Built for everyday use and features a stainless steel top plate and a hollow, steel axle. - A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal. - The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter. Specs: - Pedal Material: Composite - Pedal Weight: 115g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

Light and ergonomic, the MX 6 is the perfect pedal for all types of mountain biking. With its hollow, steel axle, it is rugged enough for any trail condition. TIME’s proprietary ATAC system makes clipping-in super easy, secure, and comfortable. The MX 6 also is self-cleaning, with the ATAC system clearing mud or debris away every time you step in. And by swapping the cleats, you have two release angle options (13 or 17 degrees) along with a self-cleaning design that means you’ll always be able to clip in – even in the muddiest of conditions. - Light and durable pedal for off-road riding - Alloy body with hollow steel spindle for durability - Easy clip-in and pedal engagement with self-cleaning ATAC cleat design that clears mud with every step-in - Freedom of movement lateral and angular - ATAC Standard Cleats included

Light and ergonomic, the Xpresso 6 is a great value as it is the only pedal in the Xpresso line to use a composite body. The steel axle is light and durable. The ICLIC system is pre-opened design, making clipping in super easy. The Xpresso 6 features carbon blade tension adjustment, a low stack height, and an oversized platform for pedaling efficiency and comfort. - Great value for proven performance - Composite body for light weight, with steel spindle for durability - Fast and easy cleat engagement - Low stack height for good clearance - ICLIC Cleats included

- Built with an aluminum body and oversized axle to handle the roughest trail conditions and biggest descents. - TIME's famous easy entry and exit system allows riders to easily put a foot down when needed and clip back in fast. - The open, self-cleaning design keeps the pedal clean so its function is not compromised by dirt, debris, or mud. Specs: - Pedal Material: Aluminum - Pedal Weight: 238g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

The ATAC XC 10 is a favorite pedal of competitive riders because of its light weight and ergonomic design. The pedal features the lightness of a carbon body with the durability of a hollow steel axle, as well as tension adjustment to fit your needs. Freedom of movement, lateral and angular, for reduced injuries and muscle fatigue. The pedal’s self-cleaning design clears mud and debris each time you step in. The ATAC XC 10 offers easy and consistent engagement with tension adjustment to meet your pedal preference and needs. This pedal is a great option for cross country, gravel, or cyclocross. - Designed for performance in off-road conditions; Ideal for cross country, gravel, or cyclocross - Carbon fiber body with hollow steel spindle for durability - Easy clip-in and pedal engagement with self-cleaning ATAC cleat design that clears mud with every step-in - Tension adjustment - ATAC Standard Cleats included

The XPRO 10 is TIME’s top blend of performance and value in a light weight and ergonomic race-ready pedal. The pedal maximizes power transfer and stability thanks to its large 725mm-squared surface area. The pedal’s bottom fairing helps improve aerodynamics and protect the carbon blade. TIME’s patented pre-opened ICLIC system allows for fast and easy cleat engagement. TIME pedals are designed to eliminate pedal-induced discomfort. You can precisely manage tightness of the clamping mechanism with three settings of the tension adjustment on the carbon blade. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. The pedal’s low stack height provides good clearance. The XPRO 10 uses a hollow steel axle, making it strong but light. - High performance, light, ergonomic at the right price - Carbon fiber body with hollow steel spindle making it strong, but light - Fast and easy cleat engagement with three tension settings of the carbon blade - ICLIC Float Cleat allows float angularly and laterally while clipped in - Low stack height for good clearance - ICLIC Cleats included

The Speciale 10, while inspired by the premium Speciale 12, stands on its own as a high-performance pedal. This pedal is up to the challenge of whatever downhill, Enduro and trail riding throws your way. Pick from two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. Grippy and durable, the Speciale 10 features an alloy anodized platform and oversized hollow steel spindle. The pedal is spring-retention adjustable (micrometric) to meet the demands of advanced riders and features TIME’s ATAC design for easy entry, predictable release, and mud clearance for reliable performance in all conditions. - Designed for performance in all conditions for enduro, trail, and downhill - Alloy platform body with hollow steel spindle - Easy engagement and performance in all conditions - ATAC cleat design clears mud with every step-in - ATAC Standard Cleats included

The ATAC XC 12 is TIME’s lightest off-road pedal, purpose-built for quick windup and trail speed. This premier XC pedal is also designed for your comfort thanks to an ergonomic design, starting with simple clip-in thanks to a wide-angle of positive cleat engagement. Once you’re clipped in, the features of ATAC XC 12 really kick in: Freedom of movement, lateral and angular, for reduced injuries and muscle fatigue. The pedal’s self-cleaning design clears mud and debris each time you step in. Light and strong with a titanium axle and carbon body, ATAC XC 12 offers easy and consistent engagement with tension adjustment to meet your pedal preference and needs. This pedal is ideal for gravel and cyclocross as well. - Designed for performance in off-road conditions; Ideal for cross country, gravel, or cyclocross - Carbon fiber body with titanium spindle for light weight - Easy clip-in and pedal engagement with self-cleaning ATAC cleat design that clears mud with every step-in - Tension adjustment - ATAC Standard Cleats included

The XPRO 12 is the go-to pedal for top racers, thanks to its light weight and ergonomic design for countless hours of riding without pedal-induced discomfort. With its carbon body and titanium axle, the XPRO 12 is wildly light but robust. The pedal’s large 725mm-squared surface area provides efficient power transfer and vital stability, so you’re ready for sprints and explosive efforts. The pedal’s bottom fairing helps improve aerodynamics and protect the carbon blade. TIME’s patented pre-opened ICLIC system allows for fast and easy cleat engagement, so you are fast off the line. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism. The XPRO 12 uses a titanium axle for a maximum rider weight of 90kg. - Light, ergonomic, aero performance pedal - Carbon fiber body with titanium spindle - Fast and easy cleat engagement with three tension settings of the carbon blade - ICLIC Float Cleat allows float angularly and laterally while clipped in - Low stack height for good clearance - ICLIC Cleats included

The Speciale 12 is the ultimate balance between aesthetics and performance. This grippy, lightweight, and strong pedal was developed for the demands of professional enduro, trail, and more. The Speciale 12 features an alloy anodized platform, titanium spindle, and is available in two sizes: Large (69x90mm) for downhill and Enduro, or Small (64x80mm) for trail or Enduro. The pedal is spring-retention adjustable (micrometric) to exceed the demands of the most advanced riders. The Speciale 12 features TIME’s renowned ATAC design for easy entry and mud clearance. TIME’s renowned engagement system allows easy engagement with a positive, predictable entry and release. - Premium design and performance in all conditions for enduro, trail, and downhill - Alloy platform body with titanium spindle - Easy engagement and performance in all conditions - ATAC cleat design clears mud with every step-in - ATAC Standard Cleats included

The XPRO 12 SL is the ultimate expression of pedal technology, making it TIME’s lightest and most ergonomic road pedal. The XPRO 12 SL’s carbon body and proprietary design create a powerful structure to transfer power from your legs to the road. Power transfer and stability are enhanced with a larger pedal surface area of 725mm-squared compared with the already large surface area of the XPRESSO at 700mm-squared. The ICLIC system, with its pre-opened design, allows for positive engagement and greater comfort. This pedal combined with the ICLIC Float Cleat allows float (angularly and laterally) while clipped in, reducing knee strain. TIME XPRO pedals offer three options for spindle length to provide riders with more ergonomic options. Finally, the XPRO 12 SL features watt-saving ceramic bearings and a super light hollow titanium spindle, resulting in an overall weight of 87.3 grams per pedal. The carbon blade is also adjustable in three positions to optimize engagement tension. The pedal’s low stack height keeps the cyclist’s sole as close to the center of the pedal axle as possible, which, along with the large pedal surface area, results in incomparable pedaling efficiency and comfort. We recommend a maximum weight of 90kg. - TIME’s ultimate road performance pedal, designed to be aero and light weight - Carbon fiber body with hollow titanium spindle and ceramic bearings - Fast and easy cleat engagement with three tension settings of the carbon blade - ICLIC Float Cleat allows float angularly and laterally while clipped in - Low stack height for good clearance - ICLIC Cleats included

The TerraTrike Comfort Pedal Conversion Kit is a great safety addition for your trike. Providing a comfortable foot support solution, they also allow for hands free entry. Specifically designed for recumbent trikes they are easily adjustable. - One pair is included in the kit. - Pedals not included - mounts to standard TerraTrike pedals. - One size fits most. - Convert standard pedals to pedals with heel support straps - Securely holds heel of foot when going over bumps - Fits TerraTrike and many other standard pedals - Easy sizing with straps

This pedal set is perfect for the rider that needs ankle support in a completely secure pedal. It features a complete foot platform with a solid heel support. It also features 2 oversize straps with reflective strip and stainless steel ringlets that allow for a strong yet comfortable fit. A counterbalance on the bottom also assures the pedal will always remain upright for easier entry and exit. Perfect for special needs and motor control issues. Sold as a set of two. --Note: This pedal is not compatible with our Tandem Pro in the stoker position. The Tandem Pro captain position can utilize these pedals. - Replaces standard pedal - Counter-weighted so that the pedal is always in the same orientation - Reflective accents for visibility in low light conditions - One size fits most: for really small feet, consider our Pedal Platform w/straps kit

- Wide, self balancing exerciser pedals with a boron axle - Durable polypropylene composite body - 155 x 160mm platform size