Parts

The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included

More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately

Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours (with LR44 battery type) - Weight: 316g - Water resistance: IPX7 - Max. rider weight: 105kg - Accuracy: +/- 1.0% - Cleat type: Shimano SPD - Q-factor: 53/55mm with supplied spacing washer - Stack height: 13.5mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth In the Box: - Rally XC100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 328g - Water resistance: IPX7 - Cleat type: SPD-SL - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RS100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

There has never been a better time to upgrade to the feel and performance of carbon wheels. Aeolus Pro 3 TLR is a full carbon, tubeless-ready rim brake road wheel that balances durability, weight, and aerodynamics for pro-level performance that doesn’t break the bank. We started with a proven 35mm-depth shape and added a confidence-inspiring brake track to make a carbon road wheel available to all. Key features - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - OCLV Pro carbon offers an optimized blend of weight, strength, and durability - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Confidence inspiring brake track increases stopping power while dissipating heat - 35mm depth OCLV Carbon rim (27mm outer, 19.5mm inner width) DT Aerolite spokes and Alpina locking nipples - Quick release hubs, Bontrager 24 point engagement, 3 pawl hub - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs - Includes TLR rim strip, TLR valve, valve core removal tool, Black Prince carbon pads, and traditional rim strip

The XG-1295 cassette carries with it the X-DOME architecture, which, independent tests have concluded, yields the strongest cassettes on the market. Shifting characteristics improve both inboard and outboard shifting as well as chain retention. - SRAM’s cassette manufacturing technology provides the greatest durability and lightest weight - All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance - XD driver body compatible Cogs - 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50 - 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52

The carbon difference If you want a lightweight XC wheel that's ready to race, look no further than Kovee Pro 30. It features a lightweight design and 29mm internal width for better traction and cornering performance so you can ride faster and with more confidence. Plus, the Rapid Drive 108 hub provides near instantaneous engagement so you get out exactly what you put in. - OCLV Pro carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 108 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148 wider hub flanges enhance bracing angle for a stiffer wheel - Ultra-durable OCLV Carbon rim with 29mm internal, 36mm external width, 28 hole front/rear - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

The Campagnolo EKAR Crankset is a lightweight and efficient 1x13-speed crank designed for gravel riding and racing. - The 2-piece crank features a strong and durable 630-grade steel alloy crank axle mated to a lightweight carbon fiber spider and unidirectional carbon fiber arm - Must be used with a Campagnolo Pro-Tech bottom bracket - Chainring features a narrow-wide tooth design for efficient drive and maximum chain security - Easy access to external crank bearings - Easily interchangeable alloy rings – no need to disassemble the crankset - Narrow Q-factor – 145.5mm Specifications: - Number of Chainrings: Single - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 123 - Pedal Spindle: 9/16" - Drivetrain Speeds: 13

- LEV has always represented the latest technology but is already a classic among top contending dropper posts. - With myriad of firsts to its name; first hydraulic dropper to offer zero cable movement, first dropper to win a UCI World XC Eliminator event and first in countless enduros, magazine tests and customer satisfaction polls, LEV IS the first dropper seatpost to outperform itself.

The carbon difference If you want a lightweight XC wheel that's ready to race, look no further than Kovee Pro 30. It features a lightweight design and 29mm internal width for better traction and cornering performance so you can ride faster and with more confidence. Plus, the Rapid Drive 108 hub provides near instantaneous engagement so you get out exactly what you put in. - OCLV Pro carbon offers an optimized blend of weight, strength, and durability - Rapid Drive 108 hub instantly transfers effort into forward momentum - Tubeless-ready (TLR) rims allow for quick upgrades to tubeless - Boost 110/148 wider hub flanges enhance bracing angle for a stiffer wheel - Ultra-durable OCLV Carbon rim with 29mm internal, 36mm external width, 28 hole front/rear - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool

The Wolf Tooth Resolve Dropper Post is the first dropper post to use a self-bleeding cartridge. It has the shortest stack height of any dropper post on the market, has a short insertion depth, is one of the lightest dropper posts, and is completely serviceable at home. - Self-Bleeding Resolve Cartridge: At the heart of Resolve Dropper Post is a self-bleeding cartridge that removes air from the fluid chamber with every actuation. All dropper posts can get air in the chamber, which leads to sag and squish. Resolve Dropper Post is the only dropper post that purges air from the chamber, which means you'll never need to buy a new cartridge as you do with all other dropper posts. - Shortest Stack Height: The shortest stack height of any dropper post means that Resolve can get your saddle lower than any other dropper post. The lower your saddle, the more room you have to maneuver your bike on drops and techy descents. - Weight and weight per travel is equal to the best: Resolve Dropper Post is one of the most lightweight dropper posts on the market when it comes to grams per millimeter of travel. It's as much as 26% lighter than other dropper posts of the same travel size. - Short Insertion Length: When a dropper post has a short insertion length, longer travel options are unlocked for more bikes. A short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses. - Travel Reduction with Spacers: The travel length of your Resolve dropper post can be customized in order to suit your bike and saddle height. Spacer kits are sold separately or those who would like to have the adjustment made later by their local shop mechanic. If you are comfortable with working on suspension components, you may be able to complete the installation yourself.

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. Power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And, for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake

- XTR M9120 brake lever and M9120 4-piston hydraulic disc brake caliper - Increased stopping power & improved modulation for greater dowhnill confidence and control - Additional contact point on handlebar increases stiffness by 8% vs BL-M9020 - Quicker engagement & shorter, adjustable free stroke - ServoWave technology - Toolless adjustable reach - Pre-assembled with SM-BH90-SBM high power hose - Includes N04C metal pads w/ fins - Weight: 385g per side (lever, caliper, hose & RT-MT900 rotor)

Chain-rattling pavement is no longer an issue thanks to Bontrager's innovative IsoCore technology in this Pro IsoCore VR-CF road bar. An additive to the carbon layup, IsoCore mutes 20% more vibrations than other carbon bars. Once you experience the comfort and control of IsoCore, you'll never want to ride another bar. - OCLV carbon with IsoCore continuous inner-laminar technology - Replaceable IsoZone EVA pads maintain original grip diameter - Variable Radius Compact Flare (VR-CF) bar shape offers greater comfort in all hand positions - IsoCore technology decreases road vibration by 20% over traditional carbon bars - Includes four replaceable EVA IsoZone pads for tops and drops

Confident and capable of cleaning the A-line yet budget-friendly to save up for a season of bucket-list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 points with 4° engagement, by way of a six pawl driver and 45-tooth drivering. - High-load sealed cartridge bearings - Classic j-bend spokes - Robust protection system using a labyrinth radial lip seal and endcap proximity seals unencumbered by bearing wear or preload - CNC machined, anodized, and assembled entirely in Asheville, NC - Service-friendly retained pawls actuated by durable leaf-springs - Unified service parts across the range

Level Ultimate is the master of two forces—power and weight—in one sleek, durable design. In this build, we took every gram to task. Carbon-fiber lever blades for crisp, clean pulls. A new two-piece, two-piston caliper for superior heat management and smooth piston actuation. With Ultimate, total control is at your fingertips. - Modern XC power for today's most demanding races - Pivot bearings offer crisp lever feel and a fatigue-free ride - Engineered for easy installation and maintenance

On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Compatible with both 1x and 2x drivetrains - 36T cog max derailleur works with 10-28T, 10-30T, 10-33T, and 10-36T cassettes - SRAM AXS-enabled, allowing easy personalization - Spring clutch keeps the drivetrain quiet and secure - X-SYNC pulleys for increased durability and efficiency - 36T max rear cog - Battery Not Included

Forget front derailleurs; SRAM's Rival 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. It combines the durability, simplicity, and efficiency SRAM is know for on the road with their 1x mountain technology, X-Sync. - Single-ring drivetrain simplifies functionality - Forged aluminum with detachable spider: 42T and 52T X-Sync tall, square tooth design provides maximum control - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses for the inner chain links and rollers - Weight: 799g (24mm spindle, 172.5mm, 42T, no BB)

The SRAM Force eTap AXS front derailleur is AXS enabled for easy personalization. The redesigned derailleur offers better rear-tire clearance—for those that explore all roads—and works perfectly with all chainring combinations. No compromises; never miss a shift. - AXS enabled for easy personalization - Elegant and streamlined form for more rear-tire clearance - SRAM Yaw trimless cage technology with an optimized cage profile for new chainring combinations - NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride. - The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants - A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert - The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim - Fits tire widths 2.6 – 3.0" and rims with internal width 32 – 45mm Includes - 2 CushCore Inserts - 2 CushCore Tubeless Air Valves - 4 Rim Stickers - Installation Instructions

The cores of brake performance are consistency, reliability, and trust. And, with G2 R, we focused on offering a premium value without compromising the heart of the operation. This brake gives riders the G2s famed "Mini-Code" power and a whole suite of SRAM standard features at an absolutely unbeatable value. - Power organic pads give riders both feel and bite - Engineered for easy installation and maintenance - Tools-free reach adjust for quick personalization

The Deore XT M8100 hydraulic disc brake is designed to provide high performance braking for a variety of MTB riding styles. Includes the brake lever and disc brake caliper. - BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding - Servo Wave Action technology means quicker brake engagement with shorter free stroke - The BR-M8100 2-piston brake caliper is optimized for cross country riding styles - Includes finned metal pads and hose - Brake Caliper Type: Post Mount - Hydraulic Hose Length: 1000mm (Front) / 1700mm (Rear) - Hydraulic Fluid Type: Mineral Oil - Rotor Included: No - Pad Compound: Metallic

A versatile trail saddle with a shorter profile that gives targeted comfort to riders of all genders and all disciplines. Trail-ready comfort and performance Verse Short Elite Trail Saddle takes comfort to the trail with a lightweight yet durable design that offers targeted support for all riders, all genders, and any off-road discipline. The short profile with a full cutout provides lasting comfort and Wing Flex allows the saddle’s edges to flex and adapt to riders’ inner leg movement and pelvic rotation. Product details: - Short profile provides targeted support for riders of any gender in a performance riding position - Wing Flex allows the shell's edges to adapt to riders' inner leg movement and pelvic rotation - Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance - Featherweight shell with Austenite rails that are lighter and stronger than hollow titanium - Rugged finishing materials combine with Elite-level foam for lightweight comfort and durability - Multiple widths and extended rail clamping area give more fit options - inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort - Blendr accessory mounts offer clean integration of a Flare tail light For men, for women, for mountain, for road. Verse Short is designed to add comfort for all genders. It's your go-to performance posture saddle for both trail and road. Features: Short profile The short profile provides targeted support and a performance riding position for all genders. Wing flex Wing flex allows the saddle shell's side edges to flex and adapt to a rider's inner leg movement and pelvic rotation. Full-length cutout A full saddle cutout minimizes soft tissue pressure for lasting comfort and performance. Blendr integration Easily mount Bontrager Flare rear lights with the Blendr accessory mount, available separately. Crash resistant Verse Short Trail Elite features an abrasion-resistant coating to protect your investment in case things get too rowdy on the trail.

A light and versatile saddle with a shorter profile for targeted comfort, perfect for riders of all genders and all disciplines. Comfort in a compact package Verse Short Elite brings comfort to any riding position thanks to a lightweight package and targeted support, backed by a versatile design that’s optimized for any rider, any gender, and any discipline. A full cutout provides long-haul comfort and Wing Flex allows the saddle’s edges to flex and adapt to riders’ inner leg movement and pelvic rotation. Product details: - Short profile provides targeted support for riders of any gender in a performance riding position - Wing Flex allows the shell's edges to adapt to rider's inner legs movement and pelvic rotation - Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance - Featherweight shell with Austenite rails that are lighter and stronger than hollow titanium - Elite-level trim optimizes foam padding for added lightweight comfort - Multiple widths and extended rail clamping area give more fit options - inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort - Blendr accessory mounts offer clean integrated mount for rear Flare light Features: For men, for women, for mountain, for road. Verse Short is designed to add comfort for all genders. It's your go-to performance posture saddle for both trail and road. Short profile The short profile provides targeted support and a performance riding position for all genders. Wing flex Wing flex allows the saddle shell's side edges to flex and adapt to a rider's inner leg movement and pelvic rotation. Full-length cutout A full saddle cutout minimizes soft tissue pressure for lasting comfort and performance.

We know good value. It comes with practicality. Durability. Sensible design. The Level TLM is that sweet spot—alloy lever blades, DirectLink actuation, DOT 5.1 fluid, and our new two-piston, two-piece caliper—all in a compact, lightweight package. This is the tried-and-true machinery for all-day, never quit performance. - A modern XC brake for the most demanding rides and races - Approachable price for bikes and riders of all levels

Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.

- The favourite among downhill and enduro experts. - The perfect choice for virtually any track. - Intermediate tread: maximum brake traction and corner grip even on extremely muddy terrain thanks to strong shoulder studs and the aggressive, open tread design.

The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems. - Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks - 32T direct mount X-SYNC 2 steel chainring included - Aluminum crank arms - 11/12-speed compatible - Bottom bracket sold separately

Let Dunderbeist loose on your local groomed single track and feel the aggressive tread claw through the snow with unrivaled propulsion and braking traction. Its 4.6-inch footprint provides enhanced flotation and is compatible with a wide range of frames. Dual compound rubber rolls fast and keeps you in control while shredding the berms. Point uphill and feel the Dunderbeist dig in as you attack climbs covered in loose, unconsolidated snow. Pair Dunderbeist with its sibling front tire, Flowbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a rear tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Flowbeist front tire

Shimano's Deore Shadow+ Rear Derailleur is loaded with mountain bike technology. The Shadow design tucks the rear derailleur closer in to the wheel, reducing damage from rocks, roots, and trail obstacles. When it comes to gear changes, Shimano's Dyna-Sys supplies consistent, smooth shifting across the entire cassette. And the Shadow+ clutch maximizes chain control by virtually eliminating chain slap and excess noise with its integrated cage-tensioning clutch. - Medium Cage (for 2x10 drivetrains) - Long Cage (for 3x10 drivetrains) - For use with Shimano 10-speed drivetrains - High-efficiency drivetrain for aggressive trail riding - Optimized gear combinations and ratios for trail riding - Maximum chain wrap capacity: 41T (medium cage)/43T (long cage) - Largest cog: 42T (medium cage)/36T (long cage) - Compatible with wide range cassette - Silent and stable for technical trail riding - Improved stability and chain retention longevity - Light shifting effort - OPTISLICK cable - Smooth and precise shifting - DYNA-SYS compatible system

It might look normal from the outside, but the engineering inside this incredible new chain design is anything but normal and it makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle drivetrain’s ultra-smooth, precise, durable and quiet performance. The Eagle chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. HARD CHROME technology extends the chain’s optimal performance life, and a Titanium Nitride coating on the Gold and Black models decreases corrosion and further reduces friction.

The strongest system is a chain with no weak links. Eagle chain links have a smooth radius with no sharp edges or chamfers, which yield a significant reduction in noise, friction, and wear. This design also allows for a flatter plate for more consistent chain riveting and greater overall strength. It's also the biggest contributor to the ultra-smooth, precise, durable, and quiet performance found in the 10-50T cassette and X-SYNC 2 chainrings. Additionally, installation is made easy with a dedicated 12-speed Eagle quick link. - Groundbreaking new chain design and technology - The Eagle chain has been completely re-engineered and is produced with new manufacturing technology. - All-new Eagle Power Lock chain connector with FLOWLINK technology provides better chain-guiding and increased longevity - The Eagle chain is the quietest, strongest, and most wear-resistant chain in the world - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings

Get another 2" of width over the stock Rover seat by upgrading to this direct stock replacement. When paired with the Wide Handlebars (sold separately), this combo adds the cockpit room you need to make your ride even more enjoyable. The "Seat Mesh - Wide Rover" is also required and sold separately. - Wide Seat frame for Rover trikes - 2" wider than stock seat frame - Added comfort for longer rides - Requires Wide Seat Mesh - Recommended add on: Wide Handlebars

A gravel handlebar with a wider flare that gives riders more comfort and control through any terrain. The bar with a flare for adventure The GR Elite Road Handlebar is a lightweight alloy bar designed to give gravel and adventure riders more comfort, control, and confidence, especially when in the drops. IsoZone EVA pads deliver entire-ride comfort, while the bar's 75mm reach, 128mm drop, and 13-degree flare make it easy to access brake levers and shifting controls from all riding positions. Product details - 13-degree flare allows for more control in the drops - Custom-butted, lightweight 6061-T6 alloy construction - Shorter reach and wider flare allows for confident handling and easy access to controls - Replaceable IsoZone EVA pads add comfort while maintaining original grip diameter - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Laser-etched brake lever position lines for spot-on control setup - Compatible with clip-on aero bars

The big news from Donnelly is the upcoming EMP gravel tire, which pulls its name from the airport code for Emporia, Kansas, home of a kinda popular gravel race that crushes souls every year. The tire is a departure from their usual tread design, getting a tighter tread block pattern without a well-defined center strip like most all of their other tires. It’s still designed to roll fast, which is key if you’re racing any long distance gravel bike event, but with bigger side knobs to handle more aggressive cornering. - Smooth-rolling center knobs and aggressive shoulder lugs - Soft rubber compound for extra grip and shock absorption - Integrated puncture protection belt under the tread - Tire Intended Use: Gravel - Labeled Size: 700 x 38 - Tire Bead: Folding - Tire Diameter: 700c - Tire Type: Tubeless Ready Clincher - Weight: 484 - Weight (oz): 17 - Flat Protection: Tread

Fast and confident on the trail From legendary tire designer Frank Stacy, the Bontrager SE2 Team Issue Mountain Bike Tire features a compound formulated specifically for lightweight, durability, improved cornering traction, and low rolling resistance. This Tubeless Ready tire is built with a reinforced sidewall and the sub-tread protection of a Core Strength casing around a fast-rolling versatile tread. - A versatile trail tire that excels in loose-over-hardpack and firm conditions - Fast-rolling, with consistent, predictable traction for a variety of trail conditions - Tubeless Ready (TLR) for easy tubeless setup and puncture protection - Core Strength has sidewall and sub-tread protection for lightweight durability

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

An aggressive tread and durable construction offer traction and confidence in the most aggressive conditions. Rubber that rails The SE5 Team Issue is a durable trail and enduro MTB tire designed for maximum braking and cornering traction without compromising rolling speed. The dual-block center tread pairs with an aggressive side tread for a versatile tire that performs well in both the front and rear. The TM-Grip rubber compound bites harder and the Core Strength construction offers additional tire support along with tread and sidewall protection. Product details - A durable, aggressively treaded MTB tire that delivers confidence on any terrain - Dual-blocked center tread with aggressive side knobs for confident cornering and braking traction - Proprietary TM-Grip compound and 120 TPI construction offer great traction and tire feel - Durable and strong Core Strength Casing adds sub-tread and sidewall protection - Tire bead chafer layer adds additional protection against abrasion and punctures - Tubeless Ready (TLR) for easy tubeless setup and puncture protection

AW3 is the set-it-and-forget-it tire for road riders and commuters. It rolls fast and keeps the flats away with improved Hard-Case Lite puncture protection. Plus, it's made with a proprietary TR-Endure rubber compound and a lightly treaded design for confidence and traction. - Leading puncture protection with traction for confidence in all conditions - Improved Hard-Case Lite puncture protection provides best-in-class defense against flats - Proprietary TR-Endure compound delivers long lasting-traction in all conditions - Smooth-rolling, lightly treaded design with siping channels for traction and all-weather confidence

Lighter, faster, and longer lasting The all-new R3 Hard-Case Lite road tire rolls faster, with added traction, and a longer-lasting tread. The proprietary TR-Speed compound and updated Hard-Case Lite puncture protection increase both speed and durability while the lightly treaded design adds traction. With R3 you get a faster road racing tire that delivers added confidence through every corner. Product details - Designed for speed, traction, and durability while racing and road riding - Proprietary TR-Speed compound provides confident, fast-rolling performance - Hard-Case Lite with improved Nylon105 beaker belt provides lightweight puncture protection, great ride feel, and extra durability - Fast-rolling, lightly-treaded design adds traction and confidence - Low rolling resistance and excellent cornering grip - Tread styling gets more aggressive as size increases to better suit intended use

Race it hard or just head off the beaten path. The Strada Bianca wraps Challenge's proven herringbone tread pattern further around a large volume casing and adds a gravel specific construction to take you comfortably over less-than-perfect surfaces. This is your tire for rough roads, packed dirt, and most gravel surfaces. This TLR clincher with 120TPI nylon casing provides both performance, durability, and puncture protection when combined with the appropriate tubeless sealant.

Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker-compatible brake set provides all the power of its siblings, keeping you in complete control.

Our most aggressively treaded trail and enduro tire, ready to deliver confident traction in any conditions. Trail taming traction The SE6 Team Issue is an aggressively treaded, durable trail and enduro MTB tire designed for absolute traction in all terrain, no matter the conditions. The alternating 2-3 center tread pairs with a robust side tread for the ultimate in braking and cornering traction. The TM-Grip compound bites harder and the Core Strength construction offers additional tire support along with tread and sidewall protection. Product details - Our most aggressive tread for trail and enduro delivers durable traction in all conditions - Aggressive two/three center tread with biting side knobs for confident traction in all conditions - Proprietary TM-Grip compound and 120 TPI construction offers great traction and tire feel - Durable and strong Core Strength Casing adds sub-tread and sidewall protection - Tire bead chafer layer adds additional protection against abrasion and punctures - Tubeless Ready (TLR) for easy tubeless setup and puncture protection

Durable yet lightweight construction for confident traction in aggressive conditions and quick climbs back to the top. Rubber that rails The XR5 Team Issue is a lightweight trail MTB tire designed for maximum braking and cornering traction without compromising rolling speed. The dual-block center tread and aggressive side tread delivers a versatile tire that performs well in both the front and rear. The TM-Grip rubber compound bites harder and the Inner Strength construction offers lightweight sidewall protection. Product details - An aggressively treaded MTB tire with a lightweight construction for confidence in any terrain - Dual-blocked center tread with aggressive side knobs for confident cornering and braking traction - Proprietary TM-Grip compound and 60 TPI construction offers great traction and tire feel - Supple and strong Inner Strength casing provides lightweight sidewall protection - Tire bead chafer layer adds additional protection against abrasion and punctures - Tubeless Ready (TLR) for easy tubeless setup and puncture protection

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, 120TPI construction, the 2x120TPI casing is supple and fast rolling with improved traction while providing high levels of support Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection EN:Wall – A butyl layer located within the casing ply that provides defence to cut and abrasion as well as providing extra sidewall support.

The MTB tire with the greatest range of applications. The all-rounder that works in every situation, no matter the weather, no matter the terrain. Widest possible range of use: for tour and all-mountain, for difficult cross-country tracks as well as technically challenging enduro trails. The Nobby Nic got a revised tread design this season: - Modern trail bike tread with stable shoulder blocks for even more traction - Enlarged gaps between blocks for better self-cleaning - Outstanding braking and forward traction due to special center stud arrangement - Evolution line, NEW Super Ground construction - Addix SpeedGrip compound - ECE: E-50 - 850g

Hans Dampf has everything to increase enduro fun. Choose it for stunning handling and the highest puncture protection on demanding trails—ascent as well as descent. - Precisely tuned stud positioning for controlled and forgiving riding at the limit - The combination of large and small shoulder studs grants the rider optimal grip in numerous conditions - Semi-open blocks ensure optimal self-cleaning properties with low rolling resistance

A fitness saddle that combines a full cut-out with air foam and a dual density shell for comfort and support on every ride. The Commuter Comp saddle offers the comfort of a full cutout saddle with the support of a saddle designed specifically for commuters and fitness riders. A durable, weather-resistant cover material protects the dual density shell and air foam construction of the saddle for long-lasting comfort wherever you ride. Plus, a simple integrated Blendr mount makes it easy to add a Bontrager Flare rear light. - Fitness Posture 4 features an upright pelvic rotation to go farther, faster - Contour Relief Zone Plus (CRZ+) full saddle cutaway enhances soft tissue protection - Dual-density shell and air foam construction is soft yet supportive - Tough, weather-resistant cover repels water - Blendr attachment allows for integrated rear light mounting

- For a safer journey. You have full control on icy roads with the Marathon Winter Plus. - For best possible puncture protection, it comes with a SmartGuard layer. - Spikes work best on ice at the minimum pressure - At max pressure, noise is reduced to a minimum on ice-free roads.

THE ORIGINAL: The archetypal high quality touring tire. The highly elastic GreenGuard layer is 3mm thick. One third of the GreenGuard is made up of recycled latex products. The "Anti-Aging" sidewall can withstand the typical cracking that results from overloading due to insufficient inflation pressure for much longer. E-BIKE READY. You can choose every Marathon for your E-Bike (E-25). The main sizes are approved and tested for E-bikes up to 50 km/h (E-50). - Very good puncture protection thanks to GreenGuard - Especially suitable for asphalt - Available in many sizes - Performance line - E-rating: E-25 - 800g

Fast and confident on the trail From legendary tire designer Frank Stacy, the Bontrager SE2 Team Issue Mountain Bike Tire features a compound formulated specifically for lightweight durability, improved cornering traction, and low rolling resistance. This Tubeless Ready tire is built with a reinforced sidewall and the sub-tread protection of a Core Strength casing around a fast-rolling versatile tread. - A versatile trail tire that excels in loose-over-hardpack and firm conditions - Fast-rolling, with consistent, predictable traction for a variety of trail conditions - Tubeless Ready (TLR) for easy tubeless setup and puncture protection - Core Strength has sidewall and sub-tread protection for lightweight durability

Lighter, grippier, and even more durable The SE4 Team Issue Tubeless Ready tire offers incredible grip and fast-rolling efficiency in a lightweight enduro-spec casing. Bontrager's innovative Core Strength construction provides DH-level protection at a fraction of the weight. Combined with a 61/50 dual-compound rubber, this tire can handle the roughest terrain and live to ride another day. Key features - A robust enduro tire that excels in loose and rocky conditions - Aggressive tread design provides confident cornering and braking traction in demanding terrain - Tubeless Ready (TLR) for easy tubeless setup and puncture protection - Core Strength has sidewall and sub-tread protection for lightweight durability

Trek Factory XC Race Team’s go-to tire is lightweight, fast-rolling, and built with confident traction to fuel all-out efforts. Built to race—and win The XR1 Team Issue TLR is an ultra-fast, ultra-light cross country race tire that's ideal for rides where speed and acceleration are key. The smooth center tread makes it easy to maintain speed and a more aggressive side tread adds confidence for corners and techier sections. The TM-Speed rubber compound rolls faster and Bontrager's Inner Strength construction delivers lightweight protection against tread punctures. Product details - A lightweight XC race tire that excels in firm and fast conditions - Smooth, fast-rolling center tread with more aggressive side tread for added cornering confidence - Proprietary TM-Speed compound and 120 TPI construction rolls fast and smooth - Supple and strong Inner Strength casing provides lightweight sidewall protection - Tubeless Ready (TLR) for easy tubeless setup and puncture protection

A do-anything combination of low rolling resistance, Hard-Case tread and sidewall protection, and a grippy, all-weather compound with siped tread for enthusiasts who want one tire for year-round riding. - Excels on the road in a variety of conditions - Hard-Case triple flat protection protects against punctures

A fast-rolling road tire for everyday riding An everyday road tire with added traction and a longer-lasting tread. The R2 Hard-Case Lite brings proven puncture protection and durability to a lightly-treaded design that maximizes confidence across all road conditions. The R2 is a fast rolling, everyday road tire that delivers lasting performance. Product details - Designed for lasting durability and performance for everyday road riding - Hard-Case Lite provides lightweight puncture protection - Fast-rolling, lightly-treaded design adds traction and confidence - Low rolling resistance and excellent cornering grip - Tread styling gets more aggressive as size increases to better suit intended use

Legendary tire designer Frank Stacy provides another race-proven design with the XR2 Team Issue mountain bike tire. It's Tubeless Ready for fewer flats, and features a specifically-formulated compound for lightweight construction, improved cornering traction, and low rolling resistance. Key features - A versatile trail tire that excels in loose-over-hardpack and firm conditions - Fast rolling with consistent, predictable traction for a variety of trail conditions - Tubeless Ready (TLR) for easy tubeless setup and puncture protection - Supple and strong Inner Strength casing provides lightweight sidewall protection - Lightweight 120 TPI casing provides great ride feel and tire performance

Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

Super tacky (in a good way) Confidently ride in all conditions with the no-slip grip of our Perf Line Handlebar Tape. This tape adds an extra layer of comfort with shock-absorbing foam, and keeps your bike looking classy and sleek with perforated details and a thinner profile. Handlebar tape with extra-tacky texture, classic perforation, and a thinner profile that lends a better grip on road rides. - Super-tacky texture offers a no-slip grip - Classic perforated styling adds texture and looks clean - Ideal stretch allows quick and easy installation - Shock-absorbing foam elevates comfort - Finishing strips and reflective Bontrager bar end plugs included - Adhesive backing simplifies installation - Thinner profile for a sleek look

Of all the components that make up a mountain bike drivetrain, the shifter doesn't exactly get a lot of spotlight time. But, as the rider's literal command and control center, the GX Eagle shifter is more than worthy of recognition. With intuitive thumb actuated triggers, the positive feel gives the right rider input to make shifts crisp and discernible every time. What's more, its already legendary reliability continues for all-day epics and all-time experiences. Plus, it features an aluminum trigger that's ready for inevitable punishment, as well as MatchMakerX compatibility. Precise and durable, it's the hard-working, no-compromise shifter keeping riders in the right gear, every ride. - Aluminum trigger designed for a positive lever feel - Master GX Eagle master colorway to match all cassette and chain colors as part of Eagle Colorsystem - Matchmaker compatible