Cables

- Brake casing has internal lining and external plastic coating - Length: 30m

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Rubber - Color: Black

Hooded end caps offer the greatest level of protection against contamination and are ideal for high contamination environments. - Rubber seal for areas that need the most protection - Alloy body

Hooded end caps offer the greatest level of protection against contamination and are ideal for high contamination environments. - Rubber seal for areas that need the most protection - Alloy body

- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating

Shifting cables for Road/Mountain bikes.

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. - Galvanized - Pre-stretched - Double ended - Cable Head: Shimano/SRAM, Huret/Simplex - Defined Color: Silver - Diameter: 1.2mm - Double Ended: Yes - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters

Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm

- Sold in pairs - Allen wrench included

Get your cables under control. - The lightest, quietest, and most versatile cable management system - For specific compatibility concerns, please contact our Customer Service team

Get your cables under control. - Plug for internal routing guide - For specific compatibility concerns, please contact our Customer Service team

For proper assembly. - Semi-matte finish - For specific compatibility concerns, please contact our Customer Service team

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

- Replacement link wire for cantilever brakes

Basics brake cables provide value on a budget. - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Pre-stretched - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Color: Silver - Diameter: 1.6mm - Length: 2795mm

Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.

The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Single end cable features weld-cut for easy installation

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - SRAM/Shimano - Slick cables are die-extruded for smooth operation - Pre-stretched - Color: Silver - Quantity Included: 1 - Diameter: 1.5 mm

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

- Fits cantilever brakes - Sold individually

Improve the performance of your tandem drivetrain with fresh stainless cables coated in smooth Teflon for friction-free shifting. Longer than a standard shift cable, its length will get the job done for any tandem. Key features: - Compatible with all Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Teflon cables are friction-free and rust-proof - Stainless steel cables are permanently rust-free - Length: 3000mm

Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.

For proper assembly. - Machined aluminum - For specific compatibility concerns, please contact our Customer Service team

- Front or rear brake - MTB specific - 1.5mm stainless cable

Stainless steel cables are extruded to provide a smooth, low-friction surface.

- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable

Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.

Replacement grub seals for Jagwire Elite Sealed kits. - Material: Rubber - 10 Pieces

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible

RockShox's Reverb Cable/Hose Line Guides are a great way to route dropper posts on frames without integrated guides. They secure with a zip tie, and feature a wide mouth that allows for cable articulation as you drop and raise your post.

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

- Hydraulic Disc Brake Hose Fitting Kit - Includes 1 threaded hosebarb, 1 red comp fittings - Compatible with Stealthamajig and standard levers

SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake

- Wire hooks securely hold housing segments together and prevent undue noise and migration - Prevent cable shafting - Secure any loose cable - Easy to use and Quiet - Option for E-Shift & Brake Shift/Dropper & Brake Shift/Dropper & E-Bike Control

- Wire hooks securely hold housing segments together and prevent undue noise and migration - Prevent cable shafting - Secure any loose cable - Easy to use and Quiet - Option for E-Shift & Brake Shift/Dropper & Brake Shift/Dropper & E-Bike Control

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

- Time saving system for managing brake cables on Break-Away bikes - Light threaded alloy barrels with rubber noise dampener

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

Jagwire's Cable Guide Stoppers are quality aluminum adapters that let you convert open-style cable housing stops on your bicycle frame so that they will hold 5mm-diameter standard cable housing sections.

Extend housing runs using these double-ended junction end caps.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire

Jagwire's Universal Cable Tips are crimp-on aluminum caps for finishing the ends of 1.8mm and smaller diameter cables. They prevent the cables from fraying and come in colors to add style to your ride. Choose from two color mixes in bottles of 30.

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

Designed for legacy Shimano STI shifting systems, the Ritchey Cable Barrel Adjuster allows you to dial in your shifting with ease and precision. - Cable Tension Barrel Adjusters - STI compatible - Adjust the cable tension for optimal STI shifting

Jagwire's Tube Tops are installed over your cable housing sections to provide a soft bumper to deaden the impact of cables hitting your frame while riding, minimizing rattles and protecting your frame's fine finish. They feature a split seam so they're easy to install by hand with no cable disassembly required. Just open the Tube Top's seam, put it on the housing where it's rubbing the frame, rotate the seam so it faces out and release. The Tube Top will stay in place and keep your bike quiet and safe.

Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.